Category: Business Central (Nav/Navision)

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

I recently did a post where I explained what default dimensions and priorities were; I’m going to break down the explanation on how to configure them into two separate posts, because, despite being very closely linked, they are maintained in different pages.

I have explained default dimensions, as well as the related dimension restrictions; in this post I’ll be taking a look at the default dimension priorities.

Default dimensions can be entered against multiple types of records, such as G/L accounts, vendors, items and customers. If we take purchase order processing as an example, if you have the same default dimensions but with different dimension values applied to the G/L account, vendor and item then Dynamics BC will default to those of the vendor.

Default dimension priorities allows you to control the order in which the default dimensions will be checked; this would, for example, allow you to select item dimensions as the highest priority so the default dimensions come from the item instead of the vendor.

Default dimension priorities are set on a Source Code basis. Below is an example of a priority order for the PURCHASES[/b] source code:

Continue reading “In Microsoft Dynamics 365 Business Central (Financial), how do I… Configure Default Dimension Priorities”

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

As part of explaining default dimensions and priorities there is another piece of functionality which should be covered and that is dimension restrictions, especially as the restrictions are configured within the Default Dimensions window.

In the previous post of this series, I showed how default dimensions can be entered; while doing so you can also enter the restrictions:

Continue reading “In Microsoft Dynamics 365 Business Central (Financial), how do I… Configure Dimension Restrictions”

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

I recently did a post where I explained what default dimensions and priorities were; I’m going to break down the explanation on how to configure them into two separate posts, because, despite being very closely linked, they are maintained in different pages.

In this post I will cover the first part of the configuration, which is the default dimensions. The same page which allows you to configure defaults, also allows you to configure restrictions, but I will only look at the defaults in this post and will cover the restrictions in another post.

You can define default dimensions on any of the card records which are used to generate transactions. This would include, although not limited to, G/L accounts, customers, vendors and items. In this post, I will be showing how to set default dimensions via a vendor, but all of the pages work in the same way.

Entering a default dimension is as simple as selecting the Dimension Code[/] and then either entering or selecting the Dimension Value Code.

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

In recent posts of this series, I took a look at dimensions, and how global and shortcut dimensions are maintained and used. There is additional functionality wich make dimensions easier to use and which can hugely reduce the amount of effort required to add them to transactions.

The first two of these pieces of additional functionality are default dimensions and dimension priorities. I thought I’d explain these in the same post as they are very closely related.

Default dimensions allow you to specify dimensions and dimension values which are automatically applied to transactions lines as the line is being entered. These defaults can then be amended if needed, but they will be added and no effort is required if the default values are correct.

As dimensions can be assigned to G/L accounts, vendors, customers and other records in Dynamics BC, there is a choice available as to which of these should provide the default dimension during transaction entry. This is where the dimension priority comes in; you can specify in Dynamics BC the order in which the locations with default dimensions are specified are read, which will determine how the defaults are populated.

There is setup needed for both of these, which I’ll cover in the upcoming articles, but getting the defaults and priorities set up correctly can save a substantial amount of time and effort.

This post is part of the In Microsoft Dynamics 365 Business Central (Administration), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

I posted an article a while ago on the update rollout timeline of Dynamics BC which applies to the cloud version. There is also a lifecycle policy which applies to on-premise version of Dynamics GP.

The page on the Modern Policy shows the lifecycle of on-premise installations of Dynamics BC; the short version, is that every version of Dynamics BC is supported for 18 months from the release date.

These 18 months period of support allow companies using the on-premise version a little more stability in terms of upgrades than the SaaS cloud version. With cloud an upgrade is available every six months and can only be delayed for so long; with on-premise you can remain on a supported version for up to six months.

The next version of on-premise Dynamics BC to come out of support is Release 2021 Wave 2 in April this year.

In Microsoft Dynamics 365 Business Central (Administration), how do I…
In Microsoft Dynamics 365 Business Central, how do I… Sign Up For a Trial
In Microsoft Dynamics 365 Business Central, how do I… Get Access to the Microsoft 365 Admin Center
In Microsoft Dynamics 365 Business Central, how do I… Create a Company
In Microsoft Dynamics 365 Business Central, how do I… Copy a Company
In Microsoft Dynamics 365 Business Central, how do I… Switch Between Companies
In Microsoft Dynamics 365 Business Central, how do I… Create a Sandbox Environment With Cronus
In Microsoft Dynamics 365 Business Central, how do I… Access Dynamics BC Admin Centre
In Microsoft Dynamics 365 Business Central, how do I… Create a Sandbox Environment With a Copy of Production
In Microsoft Dynamics 365 Business Central, how do I… Create a User
In Microsoft Dynamics 365 Business Central, how do I… Add a User In 365 Admin Center
In Microsoft Dynamics 365 Business Central, how do I… Add a User in Dynamics BC
In Microsoft Dynamics 365 Business Central, how do I… Change My Role
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the Role Center
In Microsoft Dynamics 365 Business Central, how do I… Create an Advanced Evaluation Company
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the Update Rollout Timeline
In Microsoft Dynamics 365 Business Central, how do I… Change the User Experience in a Company from "Essentials" to "Premium"
In Microsoft Dynamics 365 Business Central (Administration), how do I… Set Update Date
In Microsoft Dynamics 365 Business Central, how do I… Hide the Teaching Tips
In Microsoft Dynamics 365 Business Central (Administration), how do I… Set Update Window
In Microsoft Dynamics 365 Business Central (Administration), how do I… Extend Trial
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Search
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the Types of Pages Available
In Microsoft Dynamics 365 Business Central (Administration), how do I… Know Which Keyboard Shortcuts Are Available
In Microsoft Dynamics 365 Business Central (Administration), how do I… Switch Between Companies
In Microsoft Dynamics 365 Business Central (Administration), how do I… Use List Pages
In Microsoft Dynamics 365 Business Central (Administration), how do I… Use Advanced Filters on Lists
In Microsoft Dynamics 365 Business Central (Administration), how do I… Use Card Pages
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the FactBox
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the Action Bar
In Microsoft Dynamics 365 Business Central (Administration), how do I… Use Company Badges to Identify Companies or Environments
In Microsoft Dynamics 365 Business Central (Administration), how do I… Use Document Pages
In Microsoft Dynamics 365 Business Central (Administration), how do I… Use Worksheet Pages
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the On-premise Lifecycle Policy
In Microsoft Dynamics 365 Business Central (Administration), how do I… Start a Free Trial (Updated for the new "customised trial")
In Microsoft Dynamics 365 Business Central (Administration), how do I… Create a Sandbox for a Preview Release
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Posting Groups
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand General Posting Groups
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Specific Posting Groups
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Tax Posting Groups
In Microsoft Dynamics 365 Business Central (Administration), how do I… Create a Tax Business Posting Group
In Microsoft Dynamics 365 Business Central (Administration), how do I… Create a Tax Product Posting Group
In Microsoft Dynamics 365 Business Central (Administration), how do I… Create the Tax Posting Setup
In Microsoft Dynamics 365 Business Central (Administration), how do I… Add a Company Logo
In Microsoft Dynamics 365 Business Central (Administration), how do I… Share a Saved List View
In Microsoft Dynamics 365 Business Central (Administration), how do I… Rename a Company
In Microsoft Dynamics 365 Business Central (Administration), how do I… Rename an Environment
In Microsoft Dynamics 365 Business Central (Administration), how do I… Delete a Company
In Microsoft Dynamics 365 Business Central (Administration), how do I… Delete an Environment
In Microsoft Dynamics 365 Business Central (Administration), how do I… Restore a Deleted Environment
In Microsoft Dynamics 365 Business Central (Administration), how do I… Restore an Environment to a Point in Time
In Microsoft Dynamics 365 Business Central (Administration), how do I… Refresh an Environment
In Microsoft Dynamics 365 Business Central (Administration), how do I… Restore a Deleted Company
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the Approaches to Configuring a New Company
In Microsoft Dynamics 365 Business Central (Administration), how do I… View Two Pages at the Same Time
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Number Series
In Microsoft Dynamics 365 Business Central (Administration), how do I… Maintain Number Series
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand What Data Can Be Deleted
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand the Master Data Management
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Relationships Between Number Series
In Microsoft Dynamics 365 Business Central (Administration), how do I… Create Relationships Between Number Series
In Microsoft Dynamics 365 Business Central (Administration), how do I… Access Business Central
In Microsoft Dynamics 365 Business Central (Administration), how do I… Understand Master Data Management
In Microsoft Dynamics 365 Business Central (Administration), how do I… Add Branding to Business Central by Setting a Theme
Word Template Mail Merge in Business Central: What is it?
Word Template Mail Merge in Business Central: Create Word Template for Mail Merge
Word Template Mail Merge in Business Central: Create Mail Merge from Business Central Entity
Word Template Mail Merge in Business Central: Create Mail Merge from Business Central Using a Word Template
Word Template Mail Merge in Business Central: Create Mail Merge from a Business Central Entity using a Word Template
Word Template Mail Merge in Business Central: Send Email Using a Word Template
Word Template Mail Merge in Business Central: Send Email Using a Word Template as an Attachment
Source Codes in Microsoft Dynamics 365 Business Central: Understand Source Codes
Source Codes in Microsoft Dynamics 365 Business Central: Maintain Source Codes
Source Codes in Microsoft Dynamics 365 Business Central: Control Which Source Codes Are Used
Source Codes in Microsoft Dynamics 365 Business Central: Why You Might Want to Use a Different Source Code for Journals
Source Codes in Microsoft Dynamics 365 Business Central: Use a Different Source Code for Journals
In Microsoft Dynamics 365 Business Central (Administration), how do I… Edit Data in Excel

While I still class myself as early in my learning about Microsoft Dynamics 365 Business Central, I have recently helped a client implement the Fixed Assets module. One of the questions I was asked, and which took me a short time to work out, was if it was possible to set a residual on the asset of 30%; meaning that when an asset is depreciated it will not go below 30% of it’s acquisition cost.

I did some investigating and found that it isn’t possible to set a residual percentage, but if you calculate the residual amount you want, then you can enter this and depreciation will not take the value of the asset below this amount.

The field you need to enter this into is Ending Book Value which is available on the FA Depreciation Books page which accessible through the action bar of the Fixed Asset Card (Fixed Asset Card » Fixed Asset » Depreciation Books):

This field is not visible by default, so you will need to customise the page to make it available.

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

While Dynamics BC allows you to create as many dimensions and dimension values as needed, there is some additional functions which can make entering transactions along with dimensions easier.

These are the Global and Shortcut dimensions which are set on the General Ledger Setup page:

Continue reading “In Microsoft Dynamics 365 Business Central (Financial), how do I… Understand Global and Shortcut Dimensions”

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

As mentioned in the last article of this series, Dynamics BC uses dimensions for analysis of postings to G/L accounts. Maintaining them is quite straighforward.

To do this search for Dimin the Tell me what you want to do and select Dimensions; this will open the Dimensions page which will list any existing dimensions:

Continue reading “In Microsoft Dynamics 365 Business Central (Financial), how do I… Maintain Dimensions”

This post is part of the In Microsoft Dynamics 365 Business Central (Financial), how do I… series and of the wider In Microsoft Dynamics 365 Business Central, how do I… series which I am posting as I familiarise myself with Microsoft Dynamics 365 Business Central.

In an earlier article of this series, on understanding the chart of accounts, I commented that Dynamics BC differed from some ERP systems by only having the GL account itself in the chart of accounts where other systems also include cost centres and other elements required for reporting.

Dynamics BC does allow for reporting on these other elements, but manages them through dimensions rather than the chart of accounts itself.

Microsoft themselves describe dimensions as:

Dimensions are values that categorize entries so you can track and analyze them on documents, such as sales orders. Dimensions can, for example, indicate the project or department an entry came from.

So, instead of setting up separate general ledger accounts for each department and project, you can use dimensions as a basis for analysis and avoid having to create a complicated chart of accounts.

There isn’t a single client I have worked with over the last 20 years who does not have a need for dimensions (or similar) as no-one reports only on the G/L account. Other values to be stored in dimensions would commonly be:

• Cost Centre
• Department
• Region

Dimensions can also be used to store non-financial analysis codes such as:

• Project
• Budget Holder

The above are just examples of some of the type of analysis codes I’ve seen in the past working with clients.

Dynamics BC allows financial postings to be filtered based on the GL account and on the dimension values selected against the posting. Over a few posts in this series, I am going to take a look at setting up and maintaining dimensions, setting defaults, combinations and priorities as well as viewing data posted with dimension values assigned to them.